We use our own and/or third-party cookies to analyse the browsing habits of users on our website. More information.
(+34) 977 890 510
productos_completo
PROXI
PROXI protectors are designed for saving the corners of columns, walls or panels from an impact. Its main use is in installations where fork-lifts or pallet trucks can cause impacts on the structural
See details
CEL Latticework
CEL Latticework is formed by a couple horizontal bar welded rebars on which is welded a diagonal stainless-steel bar. This element is used for connecting both concrete phases in a sandwich panel.
See details
PIN Connector
PIN Connector consists of a stainless-steel hooked rebar for connecting both concrete phases in a sandwich panel.
See details
Architectural brackets MA
MA bracket consists of a group of welded elements formed by two steel plates, a hexagonal nut and a threaded bar used for supporting precast concrete panels.
See details
Recess architectural bracket CMA
The CMA recess consists of a steel box with a polystyrene core that creates a free space in the concrete panel. Afterwards, the MA threaded bar is placed inside this space to support the façade.
See details
Industrial bracket MI-SOL
The MI-SOL bracket consists of a group of welded elements used for supporting precast concrete facades. This type of bracket has been designed for being welded on a steel profile or on an anchor...
See details
Industrial brackets MI-ST
The MI-ST bracket consists of a group of welded elements used for supporting precast concrete facades. This type of bracket has been designed for being anchored to the precast element trough an...
See details
Recess industrial bracket CMI
The CMI recess consists of a steel box with a polystyrene core that creates a free space in the concrete panel. Afterwards, the MI-SOL or MI-ST screw is placed inside this space to support the façade.
See details
CTI
CTI anchorage consists of a “U” folded steel sheet with a central hole for anti-rolling continuous tubular concrete joists.
See details
CTE
CTE anchorage consists of a “U” folded steel sheet with a central hole welded to a rectangular plate. This accessory is used for anti-rolling tubular concrete joists on its ends.
See details
C100
C100 anchorage consists of a “Z” folded steel sheet with a central hole for anti-rolling tubular concrete joists on its ends.
See details
C200
C200 anchorage consists of a “Z” folded steel sheet with a central hole for anti-rolling continuous tubular concrete joists.
See details
BIG-80
BIG-80 anchorage consists of a “U” folded steel sheet with a central hole for anti-rolling continuous “I” shaped concrete joists.
See details
BIG-200
BIG-200 anchorage consists of a “U” folded steel sheet with a central hole for anti-rolling overlapped “I” shaped concrete joists.
See details
PCC
PCC profile consists of a steel rail with a polystyrene core that creates a free space in the joists for fixing steel covers.
See details
LOOP-100
LOOP-100 wire box has been designed to execute the connection between two or more structural elements in a fast and efficient way. This union consists in overlapping the LOOPS of each precast element
See details
PBA anchor plate
PBA anchor plate is formed by a rectangular steel plate with shear connectors that are embedded inside any precast concrete element.
See details
SOPRA
SOPRA is a support for hollow-core slabs used to make openings on the floor (slab for stairs, elevators…) without using bracings systems. Furthermore, it permits a continuous assembly of the slab.
See details
FER TF Screw
FER hammer headed screw is used in connections between Noxifer anchors and the NOXI profiles in all ways of its applications.
See details
FER AF Washer
FER Washer consists of a serrated steel sheet with a central hole to achieve an anti-slip union along with the facade anti-roll attachments.
See details
Top GR
The thickness cap GR is a ‘U’ shaped element made of polyamide 6 (PA6) that is used in OCULFIX10 regulation.
See details
Normalized screws
Noxifer also provides conventional screws (flat washers, Glower washers and nuts) to make possible the connections of its anchors
See details
UPA-C Anchors
UPA-C Anchor consists of a fold plate with a vertical hole and a horizontal slotted serrated hole for anti-rolling concrete panels. Moreover, it contains two steel triangles so as to increase its capa
See details
UPA-CTL Anchors
UPA-CTL Anchor consists of a fold plate with a vertical hole and three horizontal holes for anti-rolling concrete panels. Moreover, it contains two steel triangles so as to increase its capacity.
See details
OCULFIX 10
The OCULFIX10 is a hidden element that goes embedded into the concrete and acts as a facade anti-roll attachment. The assembly regulation is executed by screws and GR tops.
See details
OCULFIX 20
The OCULFIX20 is a hidden element that goes embedded into the concrete and acts as a facade anti-roll attachment. The assembly regulation is executed by screws.
See details
OCULFIX 30
The OCULFIX30 is a hidden element that goes embedded into the concrete and acts as a facade anti-roll attachment for panels from 160mm thick. The assembly regulation is executed by screws.
See details
OCULFIX 40
The OCULFIX10 is a hidden element that goes embedded into the concrete and acts as a facade anti-roll attachment for panels from 140mm thick. The assembly regulation is executed by screws.
See details
GRAP
GRAP Anchor consists of a fold sheet with a central hole and a couple of steel rebars welded in its inferior surface. This element act as a facade anti-roll attachment for precast concrete panels comb
See details
CUBIX
Cubix is a steel ribbed pocket used as a non-recoverable formwork in the connection between the precast column and the foundation.
See details
Column Shoe AR
Column Shoe AR is an element which, along with the anchor bolt TN, makes it possible to execute bolted connections between the precast column and the foundations and, also, between columns.
See details
Anchor bolt TN
The anchor bolt TN is a threaded corrugated bar in one of his ends, which along with the column shoe AR, make possible to execute bolted connections between the precast column and the foundations and,
See details
Wall Shoe PPR
Wall Shoe PPR is an element which, along with the anchor bolt TN, makes it possible to execute bolted connections between the precast panel and the foundations and, also, between columns.
See details
NOXI C Profiles
NOXI C Profile consists of a cold-formed profile with a suitable section for the head hammer accessories insertion. Its connection with the precast concrete element is achieved using steel sheets.
See details
NOXI R Profiles
NOXI R Profile consists of a cold-formed profile with a suitable section for the head hammer accessories insertion. Its connection with the precast concrete element is achieved using shear connectors.
See details
NOXI S Profiles
NOXI S Profile consists of a cold-formed profile with a suitable section for the head hammer accessories insertion. It contains two steel welded plates along with a couple IPE connectors so as to...
See details
COFI Anchors
COFI Anchor consists of a head hammer steel plate with a slotted serrated hole designed for anti-rolling concrete panels.
See details
COFI-TL Anchors
COFI-TL Anchor consists of a head hammer steel plate with three holes designed for anti-rolling concrete panels.
See details
UPA Anchors
UPA Anchor consists of a fold plate with a vertical hole and a horizontal slotted serrated hole for anti-rolling concrete panels.
See details
UPA-TL Anchors
UPA-TL Anchor consists of a fold plate with a vertical hole and three horizontal holes for anti-rolling concrete panels.
See details
Sleeve
The sleeve is a tubular ribbed profile (circular or rectangular) used to connect the precast column with the foundation.
See details