The OCULFIX10 is a hidden element that goes embedded into the concrete and acts as a facade anti-roll attachment. The assembly regulation is executed by screws and GR tops.
The geometry is defined as a combined open box by a “U” shaped steel sheet with a welded plate in its interior. This platen has a slotted hole that permits the regulation in the horizontal axis during the assembly. Moreover, it has welded a couple of steel rebars that permits a correct connection with the concrete.
The OCULFIX Anchor is supplied with a polystyrene core so as to avoid the concrete filling in the box during the manufacturing process of the precast element.
Moreover, according to the exposure degree, the OCULFIX can be supplied with a zinc plated, galvanized or in stainless steel.
ESSENTIAL CHARACTERISTICS
- Dimensional and geometrical tolerances: According to EN-1090 – 2
- Weldability: Degree JR according to EN 10025-2
- Rebar weldability: Degree S according to UNE 36068
- Fracture toughness: 27 J a 20º C, according to EN 1993-1-10
- Fire resistance: Classified material: Class A1
- Cadmium emission: NO EMISSIONS
- Radioactivity emission: NO EMISSIONS
- Durability: Surface preparation type P3: Electroplated zinc coating EN ISO 2081
STRUCTURAL CHARACTERISTICS
- Material of steel sheet of 3mm S325: According to EN 10025-2
- Material of steel sheet of 10mm S275JR: According to EN 10025-2
- Rebar: B500S according to UNE 36068
- Sizing: According to EN 1993-1
- Execution class: EXC2
- Fire resistance: PND (Exterior element)
- Fatigue strength: PND (Static loads)
- Manufacture: According to EN 1090-2, execution method EXC2
- Load-bearing capacity: Characteristic values of the actions. Global safety coefficient (material and increasing loads) = 2,76.