MA bracket consists of a group of welded elements formed by two steel plates, a hexagonal nut and a threaded bar used for supporting precast concrete panels.
Inside the concrete panel, there is embedded a CMA recess where there is placed the MA threaded bar. Therefore, the weight of the concrete panel is transmitted from the recess CMA to the bracket. Finally, the MA bracket is fixed to the concrete slab through an expansive anchor or by means of welding.
This support typology permits having a regulation on the three main axes: vertically, it is adjustable through the threaded bar; horizontally, is adjustable through the CMA; in depth, is adjustable with the slotted hole of the MA.
Apart from the support bracket MA, it is needed to place an anti-roll system such as an UPA or COFI to avoid the overturning of the concrete panel.
ESSENTIAL FEATURES
- Dimensional and geometrical tolerances According to EN 1090 - 2
- Sheet metal weldability Grade JR according to EN 10025-2
- Fracture toughness 27 J a 20o C, according to EN 1993-1-10
- Reaction to fire Classified material: Class A1
- Cadmium emission NO EMISSIONS
- Radioactivity emission NO EMISSIONS
- Durability Surface preparation type P3. Continuous hot dip galvanized for cold forming, according to EN ISO 10346.
STRUCTURAL FEATURES
- Sheet material of 4mm S235JR according to EN 10025-2
- Sheet material of 5mm S275JR according to EN 10025-2
- Nut According to DIN, UNE EN ISO 898-1
- Sizing According to EN 1993-1
- Type of execution EXC3
- Fire resistance NPD (Outer element)
- Fatigue resistance NPD (Static loads)
- Manufacturing According to EN 1090-2, type of execution EXC3
- Bearing capacity Characteristic values of actions